53
-EN
01GB05INA-W900E.fm
ALPINE INA-W900E 68-16909Z25-A (EN)
Registering the BLUETOOTH Device
The BLUETOOTH device is used when a connectable BLUETOOTH
compatible device is searched and connected from this unit, or a new
BLUETOOTH compatible device is registered.
Setting item: DEVICE SEARCH
1
When Device Search is selected, “NOW
SEARCHING” is displayed, and searching starts.
2
Touch
[
]
of the device name to be connected from
the Device Search list.
3
If the adapter is successfully connected to a
BLUETOOTH compatible device, a paired device
name and a registered number (No. 1 to 5) are
displayed, and then the unit returns to normal mode.
•
If a mobile phone is registered for the first time:
Input a passcode when the numeric keypad screen is displayed, then
input the same passcode in the BLUETOOTH compatible device to
make the pairing. After the pairing is completed, the unit will
automatically connect to the BLUETOOTH compatible device.
•
If you input the wrong passcode or communications fail, “FAILED”
is displayed.
•
A passcode input on the unit is maximum 4-digit. If a passcode on the
BLUETOOTH compatible device exceeds 4 digits, reset the passcode
and make this setting again.
Deleting a BLUETOOTH Device from the list
You can delete the history of a previously connected BLUETOOTH
compatible device.
Setting item: CLEAR DEVICE
1
Touch
[
]
of the BLUETOOTH compatible device
you want to delete from the Clear Device list.
A message is displayed.
2
Touch
[YES]
if you want to delete.
•
Touching
[NO]
will cancel the setting.
•
The registration number 5 is deleted once the ignition key goes from
ACC to off.
Displaying the phone service provider name
Setting item: SERVICE PROVIDER
The service provider name of the connected BLUETOOTH compatible
device will be displayed. If a BLUETOOTH compatible device is not
connected, “ID UNSENT” will be displayed.
•
Depending on the character type some phone service provider name
cannot be displayed.
Setting the Search Mode
You can set whether this unit can be recognised or not from a
BLUETOOTH compatible device. Normally set this to VISIBLE
MODE ON.
Setting item: VISIBLE MODE
•
Depending on the mobile phone, it may be necessary to input a
passcode. For inputting the mobile phone’s passcode, refer to the
mobile phone’s Owner’s Manual.
Setting the Received Calls automatically (Auto Answer)
When a call is received, you can set whether to receive it automatically
or not.
Setting item: AUTO ANSWER
•
If the received call setting on the mobile phone is on, the call will be
answered automatically even though this setting is set to OFF.
Selecting the output speaker
You can select the connected speaker in car to output the sound signal of
telephone.
Setting item: SPEAKER SELECT
•
The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
•
When an IMPRINT audio processor (PXA-H100) or External Audio
Processor (PXA-H701, etc.) is connected, the default setting ALL will
be set and cannot be adjusted.
Adjusting the volume for the microphone input
You can emphasise or weaken the microphone input volume level.
Setting item: MIC INPUT
Touch
[
]
or
[
]
to select the desired volume level (0~7).
•
The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
•
The setting can be adjusted only when the BLUETOOTH compatible
device is connected.
Displaying the firmware version
Setting item: FIRMWARE VERSION
The current firmware version of this unit will be displayed.
Updating the firmware
Setting item: FIRMWARE UPDATE
Future BLUETOOTH firmware update of this unit (for phone
compatibility) at customer end will be available for this unit.
For information to update your BLUETOOTH firmware, please visit
Alpine Asia home page (http://www.alpine-asia.com).
•
When the BLUETOOTH firmware version is above 255, version
information may not be correctly displayed. For details, please refer
to Alpine home page.
ON:
Enables recognition of this unit from the
BLUETOOTH compatible device.
OFF:
Disables recognition of this unit from the
BLUETOOTH compatible device.
ON:
When a call is received, it will be taken
automatically after about 5 seconds.
OFF:
When a call is received, it will not be
received automatically. If a message is
displayed and
[
]
is touched when a call
is received, you can receive the call.
ALL:
The sound be output from all of speakers in car.
F-L:
The sound only be output from the front left
speaker.
F-R:
The sound only be output from the front right
speaker.
F-LR:
The sound be output from the front left and front
right speaker.
01GB00INA-W900E.book Page 53 Monday, September 13, 2010 9:52 AM
