52
-EN
01GB05INA-W900E.fm
ALPINE INA-W900E 68-16909Z25-A (EN)
•
BT Audio source is not available with this unit.
Setup Before Using
BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 metres. For details, refer to the BLUETOOTH
Home page (http://www.BLUETOOTH.com/).
•
Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with this unit.
•
Proper function of this unit with all BLUETOOTH compatible
devices is not guaranteed. For handling of the BT compatible device,
consult your ALPINE dealer or ALPINE website.
•
Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
•
When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
•
Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the
connected device(s).
Before using the hands-free phone function, the following settings need
to be made.
1
Set “BLUETOOTH IN” to ON (page 66).
•
Before using a hands-free phone, it must be paired with this unit.
Refer to “BLUETOOTH Setup” (pages 52-53).
For details on the control from a BLUETOOTH compatible device,
refer to the Owner’s Manual of the BLUETOOTH compatible device.
1
Set a BLUETOOTH connection from a BLUETOOTH
compatible device.
2
The PIN code (“0000”) is displayed on the unit.
3
Input the PIN code (“0000”) in a BLUETOOTH
compatible device.
4
If this unit is successfully connected to a
BLUETOOTH compatible device, “CONNECTED/
(Device name)” is displayed, and then the unit
returns to normal mode.
•
Set “Setting the Search Mode” (page 53) to VISIBLE MODE ON to
enable a mobile phone to recognise this unit. For mobile phone
passkey (passcode) input operation, refer to the mobile’s Owner’s
Manual. Additionally, the mobile phone can be searched directly
from this unit. Refer to “Registering the BLUETOOTH Device”
(page 53).
•
If a BLUETOOTH compatible device is successfully connected, the
next time when the ignition key of the car is turned to on, the unit will
automatically connect to the previously connected device. However,
the connection may fail. If the auto connection fails, try the
connection manually.
BLUETOOTH Setup
The following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
•
While calling, BLUETOOTH Setup operation cannot be performed.
•
Set “BLUETOOTH IN” to ON (page 66), and then perform
BLUETOOTH Setup operation.
1
Touch
[SETUP]
on the main source screen.
The SETUP main screen is displayed.
2
Touch
[SOURCE SETUP]
.
The Source Setup screen appears.
3
Touch
[
]
of BLUETOOTH SETUP.
The BLUETOOTH Setup screen appears.
4
Touch
[
]
,
[
]
or
[
]
of the desired item to
change its setting.
Setting items:
PAIRED DEVICES / DEVICE SEARCH / CLEAR DEVICE /
SERVICE PROVIDER / VISIBLE MODE / AUTO ANSWER /
SPEAKER SELECT / MIC INPUT / FIRMWARE VERSION /
FIRMWARE UPDATE
5
Touch
[
]
to return to the previous screen.
Touch
[ESC]
to return to the main source screen that was
displayed before the setup operation was started.
Setting the BLUETOOTH Device
Select one of 5 connected BLUETOOTH compatible devices that you
previously registered.
Setting item: PAIRED DEVICES
Touch
[
]
of the BLUETOOTH compatible device to use
(change connection) from the Paired Device list.
•
If the connection is successfully changed, “CONNECTED/(Device
name)” is displayed for 2 seconds, and then the display returns to the
Setup screen.
•
If you input the wrong passcode or communications fail, “FAILED”
is displayed.
•
If you want to connect another BLUETOOTH compatible device,
after disconnecting the current BLUETOOTH compatible device,
connect the BLUETOOTH compatible device you want to change to.
•
The registration number 5 is deleted when you set ignition from ACC
to OFF. If all the 5 positions have been registered, you cannot
register the 6th device. To register another device, you need to delete
one of the devices from position 1 to 5 first.
BT Hands Free
Calling
About BLUETOOTH
Before Using Hands-Free Function
How to connect to a BLUETOOTH
compatible device (Pairing)
BLUETOOTH Setup Operation
01GB00INA-W900E.book Page 52 Monday, September 13, 2010 9:52 AM
