104
-EN
01GB07INA-W900E.fm
ALPINE INA-W900E 68-16909Z25-A (EN)
System Example
Connect the Ai-NET compatible audio processor (Fiber optic digital compatible) DVD player and changer.
Audio Processor (PXA-H701)
(Ai-NET) (Fiber Optic Digital
compatible) (sold separately)
Ai-NET cable
Ai-NET
cable
CD Changer
(Ai-NET)
(sold separately)
DVD Video Player
(Ai-NET)
(DVA-5210, etc.)
(sold separately)
REMOTE IN
REMOTE OUT
(White/Brown)
(White/Brown)
(Yellow)
Ai-NET cable
Please observe the following when using Fiber Optic Cable (Optical Digital Cable).
•
Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
•
Do not place anything on top of the Fiber Optic Cable.
•
Be careful not to bend the Fiber Optic Cable at a sharp angle.
Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
System Switch
When connecting an IMPRINT audio processor or divider
using Ai-NET feature, place the two switches in the EQ/DIV
position. When no device is connected, leave the switches
in the NORM position.
•
Do not make the two switches to different settings.
•
Be sure to turn the power off to the unit before changing the switch
position.
Ai-NET Cable (Included with DVD video player)
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
To Ai-NET Connector (Grey)
RCA Extension Cable (Included with DVD video
player)
Video Input Connector (AUX INPUT) (Yellow)
Connect the video output lead of a DVD video player or
DVD changer to this terminal.
AUX I/O Connector
To Ai-NET Connector (Black)
Ai-NET Cable (Included with Audio Processor)
Ai-NET Cable (Included with CD Changer)
Guide Connector (Black)
Output the audio signal of navigation interruption.
RCA Extension Cable (sold separately)
Guide Input terminal
Fiber Optic Cable (sold separately)
*
Only connect fiber optic digital compatible CD Changer
01GB00INA-W900E.book Page 104 Monday, September 13, 2010 9:52 AM