5.
Installation
WARNING!
To avoid personal injury or damage to the equipment, always use at least two installation personnel to
remove the unit from its container.
5.1
Installation of the Micro350
WARNING!
Batteries or other components (with the exception of factory-installed components) must not be installed
until the Micro350 cabinet has been securely set in place at its permanent location. Transporting the unit
with batteries installed may cause a short circuit, fire, explosion, and/or damage to the battery pack,
enclosure and installed equipment.
Damage caused by improper shipping or transporting a unit with batteries installed is not covered by the
warranty.
5.1.1
Mounting the Micro350 Enclosure
5.1.1.1
Mounting to a wooden pole
Have the following tools and materials on hand:
13 mm nut driver for the bolts that attach the cabinet to the mounting bracket.
Two 5/8 inch diameter machine bolts (UNC tread); SAE (Grade 5 or better), length to suit the pole (not
provided).
Two 5/8 inch diameter zinc-plated flat washers.
Two 5/8 inch diameter hex nuts (UNC thread).
Auger or drill for boring 3/4 inch diameter holes in the wood pole.
Page
23
to
106
Summary of Contents for FXM 350 Series
Page 1: ...Alpha FXM Series 350 USER MANUAL...
Page 21: ...Page 20 to 106...
