STEP 3: Install Signal Assembly Option
1.
Attach the signal assembly to the left ear.
2.
Connect the signals connector cable from the signal assembly to the FXM Figure 20.
5.2.2
Wiring the AC Input and Output
WARNING!
Make sure the line power is off and tagged. Switch off all input and output circuit breakers on the FXM350
before making any electrical connections.
The electrical connectors are located on the right side of the
FXM350.
AC Input
– 120/230Vac
(#14 AWG)
AC Output 2
–
24Vac (#12
AWG)
Ensure that the cables
are routed through the
AC cover plate and/or
wiring box and suit- ably
strain relieved.
AC Output 1
–
120/230Vac (#14 AWG)
Figure 21
— FXM350 Electrical Connections
5.2.3
Ferrite Ring for Network Cable
Remove the ferrite ring and cable tie from the plastic bag of small parts that were part of your shipment. Attach
the ferrite ring to the connector end of your RJ45 network cable as shown.
Page
31
to
106
Summary of Contents for FXM 350 Series
Page 1: ...Alpha FXM Series 350 USER MANUAL...
Page 21: ...Page 20 to 106...
