Alpha Outback Energy FXM 350 Series, User Manual

Page: 45 / 108

Table B
— Control Menu
LCD display Meaning Description
SHUTDOWN
Shutdown AC
and DC
When this function is switched on, the Alpha FXM inverter is shut off. Neither
Line nor Inverter power is supplied to the load. If a dry contact was used as a
LVD, the LVD will open. See section 7.5.4.
SHUTDOWN
AC
Shutdown AC
When this function is switched on, the Alpha FXM inverter is shut off. Neither
Line nor Inverter power is supplied to the load.
SHUTDOWN
DC
Shutdown DC
When this function is switched on, the Alpha FXM DC output is shut off.
Available when dry contact C1 is programmed to be the Low Voltage
Disconnect indicator. See "7.5.4 Programming the Dry Contacts" on page
82.
SENSE TYPE Sense Type
This function can only be used when the Alpha FXM is in Standby or
Shutdown mode
—see Table A for operating mode descriptions.
This function toggles between:
NORMAL: The Alpha FXM can operate successfully with most line
conditions.
OR:
GENERATOR: The Alpha FXM input voltage and frequency parameters are
expanded so the Alpha FXM can work with the fluctuations caused by a
generator or noisy line.
FUNC MODE
Functional
Mode
This function toggles between:
AUTOMATIC VOLTAGE REGULATION (AVR):
The buck and boost modes are active.
OR:
QUALITY: The buck and boost modes are switched off; the input voltage is
the Alpha FXM output voltage.
VOLTAGE Voltage
Let’s you set the Alpha FXM output voltage setting to 120 Vac or 230 Vac.
This should ONLY be done by a qualified technician acting under the
instructions of Alpha Technologies Customer Service Department. Failure to
contact Alpha Technologies before performing this procedure could void
your warranty.
FREQUENCY Frequency
The frequency can only be changed when the Alpha FXM is in Standby
mode. This lets you set the Alpha FXM’s frequency setting to 50 Hz or 60
Hz. This should ONLY be done by a qualified technician acting under the
instructions of Alpha Technologies Customer Service Department. See
"Service and Technical Support". Failure to contact Alpha Technologies
before doing this procedure could void your warranty.
Page 44 to 106