7.3.1
Installation and Set Up
The following tools and materials are needed:
Computer with network card and web browser
Cross over cable or hub
The UPS Final IP Address and Subnet Mask and if needed the Default Gateway and the DNS Server ad-
dresses
CAUTION!
To successfully complete this procedure, you should have a working knowledge of network protocols
and how to configure them. Consult your network administrator for details.
If multiple UPS are installed on the same network, configure each unit’s IP address before the installation.
(See "Figure 27
— LCD Control Panel Logo Screen" on page 42.) Each UPS on the network MUST have its
own unique IP address.
7.3.1.1
Procedure
1.
Connect the Alpha FXM to a personal computer with either the cross over cable or a hub.
2.
Open the web browser on the computer.
3.
Configure the network card to talk to the FXM communication module. The module’s default address is
http://192.168.0.90.
4.
Cut and paste the IP address into the browser and press ENTER.
5.
Select
Communications > Configure TCP/IP
in the home screen (Figure 29).
6.
Configure the TCP/IP properties according to your network’s requirements.
7.
Click
Apply Settings
.
Figure 30
— Alpha UPS Monitor: UPS Communications screen
Page
50
to
106
Summary of Contents for FXM 350 Series
Page 1: ...Alpha FXM Series 350 USER MANUAL...
Page 21: ...Page 20 to 106...
