7.4
The Alpha UPS Monitor Interface
The Alpha UPS Monitor graphical user interface (GUI) provides web or Windows-like computer communications
with the Alpha FXM. The Alpha FXM can be connected to a computer with a USB cable. The screen and its
features, shown in Figure 29, are used to monitor, control and set various parameters like the date and time,
determine when to perform a weekly self-test, change the relay configurations, etc. The on-line indicator
(F) shows if you are connected to the Alpha FXM.
The Alpha UPS Monitor automatically polls the Alpha FXM to obtain its status. If a light or lights are illuminated in
the Fault or Alarm fields, the Alpha FXM has a malfunction. Hover your mouse cursor over the light to learn the
type of malfunction or double-click on it to go straight to the Alarms & Faults screen.
To control the unit or change settings or parameters, either click on the On/Off buttons, or choose an item from a
drop down menu. Then click on the
Update Configuration
button. If you do not click on this button, the change will
not happen.
E
F
B
C
A
D
A
Screen selection menus
B
Current UPS operating mode. Updates automatically.
C
Fault and alarm indicators
– when a light in this bar is illuminated, move the mouse cursor
over the light to determine the malfunction. Double-clicking on the light will send you to the
Alarms & Faults screen.
D
Readout screens
E
Drop-down menus
F
Online indicator
Figure 64
— Alpha UPS Monitor (UPS Specification Screen shown)
Page
73
to
106
Summary of Contents for FXM 350 Series
Page 1: ...Alpha FXM Series 350 USER MANUAL...
Page 21: ...Page 20 to 106...
