11
Subject to technical amendments without prior notice | 83055400iUK – 2.1 | ait-deutschland GmbH
Startup guide
If the startup guide is not called up via the flashing “GO” symbol
in the navigation screen, this can be done in the “Service” pro-
gram area.
You will be guided step-by-step through several selection options
used to set up your heat pump.
For example:
For the number of the control setting, please refer to the hydraulic diagrams we have
published.
Further queries will follow.
For more information on the commissioning assistant, please re-
fer to the corresponding sections in this operating manual.
NOTE
As soon as the startup guide has been executed once, the
menu item “Reset Startup Parameters” appears on the dis-
play instead of the “Startup guide” menu item.
FIX STARTUP PARAMETERS
With installer or customer service access, it is possible to save the
settings made during commissioning (= startup guide). This al-
lows you to quickly and easily reset the system to the status it had
at startup.
The data is stored on the circuit board of the control unit.
Follow the instructions on the screen and save the set-
tings.
You can also save the settings to an external USB stick.
