36
36
Parameter. Press and hold the hold the Test/Reset button for 2 seconds
to exit the Configuration menu.
P12 — Night Setback Low Alarm
This Configuration Parameter sets the night setback low alarm. After
this configuration menu selection is entered, the monitor will turn on
the program mode PGM descriptor and display the current value for the
night setback low alarm. It may be set to “OFF” or a numerical value;
see P07 for a functional description of this feature.
If the monitor is configured for a night setback low alarm of 55 fpm,
for example, the display will show:
Press the Up/Down buttons to increase/decrease the displayed value by
1 measurement unit. Once the displayed value reaches a setting where
it is above the normal low alarm or below the lowest setpoint of the
instrument, the display will go to OFF.
When the desired setting is displayed, press the Test/Reset button. The
PGM descriptor will flash once and the horn will emit two quick beeps
to acknowledge the save.
