26
26
P07 — Dis Input
This Configuration Parameter configures the switch settings for the
instrument’s Remote Test/Reset , Remote Emergency Purge, and Night
Setback features. After this Configuration menu selection is entered,
the monitor will turn on the Program mode PGM descriptor and display
the current setting. Press the Up and Down arrow keys to scroll
through the available settings.
NOTE:
P07 may only be configured to have one of these features
operational at a time. The Remote Test/Reset and Remote Emergency
Purge functions are also available under P08.
Remote Test/Reset
— This allows the operator to activate the
instrument’s Test/Reset function remotely via a contact closure. It
functions in the same manner as the Test/Reset button on the
instrument’s front panel (see Section 1). The local Test/Reset button is
still active even if the instrument is configured for Remote Test/Reset.
If this function is active, the following display will appear under P07:
Remote Emergency Purge
— This allows the operator to activate the
instrument’s Emergency Purge function remotely via a contact closure.
It functions in the same manner as the Emergency Purge button on the
instrument’s front panel (see Section 1). The local Emergency Purge
button is still active even if the instrument is configured for Remote
Emergency Purge. If this function is active, the following display will
appear under P07:
