ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
92
Detection
.
9.
Click
to save the settings.
6.6.11
Configuring Face Detection
Purpose:
After the face detection is enabled, a face appears in the surveillance area,
it will be detected and certain actions may be triggered by the detection.
Steps:
1.
Check the
Enable Face Detection
checkbox.
2.
(Optional) You can check the Enable Dynamic Analysis for Face
Detection checkbox if you want the detected face get marked with
rectangle in the live view.
Figure 6-59
Configuring Face Detection
3.
Configure the sensitivity for face detection.
Sensitivity:
Range [1-5]. The value of the sensitivity defines the size of
the object which can trigger the alarm, when the sensitivity is high, a
very small object can trigger the alarm.
4.
Click
to edit the arming schedule for face detection. The
arming schedule configuration is the same as the setting of the arming
schedule for motion detection. Refer to
Step 2
in
Section
6.6.1
Configuring Motion Detection
.
5.
Check the checkbox to select the linkage method taken for the face
detection. Notify surveillance center, send email, upload to FTP, trigger
channel, smart tracking and trigger alarm output are selectable. Please
refer to
Step 3
in
Section
6.6.1 Configuring Motion Detection
.
6.
Click
to save the settings.
