ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
36
Figure 5-3
Configure the PTZ Limit
2.
Click the checkbox of
Enable Limit
and choose the limit type as
manual stops or scan stops.
Manual Stops:
When manual limit stops are set, you can operate the PTZ control
panel manually only in the limited surveillance area.
Scan Stops:
When scan limit stops are set, the random scan, frame scan, auto scan,
tilt scan, panorama scan is performed only in the limited surveillance
area.
Manual Stops
of
Limit Type
is prior to
Scan Stops.
When you
set these two limit types at the same time,
Manual Stops
is valid
and
Scan Stops
is invalid.
3.
Click the PTZ control buttons to find the left/right/up/down limit stops;
you can also call the defined presets and set them as the limits of the
dome.
4.
Click
Set
to save the limits or click
Clear
to clear the limits.
5.4
Configuring Scheduled Tasks
Purpose:
