ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
83
5.
Click
to save the settings.
6.6.3
Configuring Video Tampering Alarm
Purpose:
You can configure the speed dome to trigger the alarm actions when the
lens is covered.
Steps:
1.
Enter the video tampering Settings interface:
Configuration > Advanced Configuration > Basic Event > Video
Tampering
Figure 6-51
Tampering Alarm
2.
Check
Enable Video Tampering
checkbox to enable the tampering
detection.
3.
Set the tampering area. Refer to
Step 1
in
Section
6.6.1 Configuring
Motion Detection
.
4.
Click
to edit the arming schedule for tampering. The arming
schedule configuration is the same as the setting of the arming schedule
for motion detection. Refer to
Step 2
in
Section
6.6.1 Configuring
Motion Detection
.
5.
Check the checkbox to select the linkage method taken for the
tampering. Notify surveillance center, send email, trigger channel and
trigger alarm output are selectable. Please refer to
Step 3
in
Section
6.6.1
