ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
21
Chapter 4
Live View
In this and the following chapters, operation of the speed dome by the
web browser R will be taken as an example.
4.1
Power-up Action
After the power is applied, the speed dome will perform self-test actions.
It begins with lens actions and then pan and tilt movement. After the
power-up self-test actions, the information as shown in Figure 4-1 will be
displayed on screen for 40 seconds.
The System Information displayed on the screen includes the dome model,
address, protocol, version and other information. The COMMUNICATION
refers to the baud rate, parity, data bit and stop bit of the dome. e.g.,
“2400, N, 8, 1” indicates the dome is configured with the baud rate of
2400, no parity, 8 data bits and 1 stop bit.
Figure 4-1
Power-up Information
4.2
Live View Page
Purpose:
The live video page allows you to view live video, capture images, realize
PTZ control, set/call presets and configure video parameters.
Log in the network speed dome to enter the live view page, or you can
click
on the menu bar of the main page to enter the live
view page.
