ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
11
Chapter 2
Network Connection
Before you start:
If you want to set the network speed dome via a LAN (Local Area
Network), please refer to
Section 2.1 Setting the Network Speed
Dome over the LAN.
If you want to set the network speed dome via a WAN (Wide Area
Network), please refer to
Section 2.2 Setting the Network Speed
Dome over the WAN.
2.1
Setting the Network Speed Dome over the LAN
Purpose:
To view and configure the speed dome via a LAN, you need to connect the
network speed dome in the same subnet with your computer, and install
the SADP or client software to search and change the IP of the network
speed dome.
For the detailed introduction of SADP, please refer to Appendix 1.
2.1.1
Wiring over the LAN
The following figures show the two ways of cable connection of a
network speed dome and a computer:
Purpose:
To test the network speed dome, you can directly connect the network
speed dome to the computer with a network cable as shown in Figure
2-1.
Refer to the Figure 2-2 to set the network speed dome over the LAN
via a switch or a router.
Figure 2-1
Connecting Directly
