ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
35
keyboard as Low, Normal or High.
Auto Scan Speed:
The dome provides 5 scan modes: auto scan, tilt
scan, frame scan, random scan and panorama scan. The scan speed
can be set from level 1 to 40.
Zooming Speed
: The zoom speed is adjustable from level 1 to 3.
PTZ OSD:
Set the on-screen display duration of the PTZ status.
Zoom Status:
Set the OSD duration of zooming status as 2 seconds,
5 seconds, 10 seconds, Always Close or Always Open.
PT Status:
Set the azimuth angle display duration while panning
and tilting as 2 seconds, 5 seconds, 10 seconds, Always Close or
Always Open.
Preset Status:
Set the preset name display duration while calling
the preset as 2 seconds, 5 seconds, 10 seconds, Always Close or
Always Open.
Power-off Memory:
The dome can resume its previous PTZ status or
actions after it restarted from a power-off. You can set the time point
of which the dome resumes its PTZ status. You can set it to resume the
status of 30 seconds, 60 seconds, 300 seconds or 600 seconds before
power-off.
3.
Click
to save the settings.
5.3
Configuring PTZ Limit Stops
Purpose:
The dome can be programmed to move within the configurable limit stops
(left/right, up/down).
Steps:
1.
Enter the Limit Configuration interface:
Configuration
>
Advanced Configuration
>
PTZ
>
Limit
