ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
55
1.
Connect the network camera to your PC directly with a network cable.
2.
Enter the 802.1X Settings interface:
Configuration >
Advanced Configuration >
Network > 802.1X
Figure 6-17
802.1X Settings
3.
Check the
Enable IEEE 802.1X
checkbox to enable it.
4.
Configure the 802.1X settings, including user name and password.
The EAP-MD5 version must be identical with that of the router or
the switch.
5.
Enter the user name and password (issued by the CA) to access the
server.
6.
Click
to finish the settings.
The camera reboots when you save the settings.
7.
After the configuration, connect the camera to the protected
network.
6.3.7
Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network
congestion by configuring the priority of data sending.
Steps:
1.
Enter the QoS Settings interface:
Configuration >Advanced Configuration >
Network > QoS
Figure 6-18
QoS Settings
