ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
27
Tilt the speed dome up or down.
Zoom in or out.
Refocus the lens.
3.
Click
to finish the setting of the current preset.
4.
You can click
to delete the preset.
You can configure up to 300 presets.
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
to call the preset.
Figure 4-6
Calling a Preset
For convenient preset selection, refer to the following steps to navigate to
the preset you want.
Steps:
1.
Select any preset from the list.
2.
Click the preset number you need on the keyboard.
The following presets are predefined with special commands. You
can only call them but not configure them. For instance, preset 99 is
the “Start auto scan”. If you call the preset 99, the speed dome starts
auto scan function.
Table 4-3
Special Presets
Special
Preset
Function Special
Preset
Function
