Allnet ALL-CAM2399-EP User Manual Download Page 77

Page: 77 / 151

ALL-CAM2399-EP User Manual

Errors and omissions excepted

Figure 6-43

Adjust OSD Location

The font color can also be customized, select the Custom in the drop
down list and select the font color on your demand.

Click

to activate above settings.

6.5.3

Configuring Text Overlay Settings

Purpose:

You can customize the text overlay.

Steps:

Enter the Text Overlay Settings interface:

Configuration

Advanced Configuration

Image

Text Overlay

Check the checkbox in front of textbox to enable the on-screen display.

Input the characters in the textbox.

Use the mouse to click and drag the red text frame

in the live

view window to adjust the text overlay position.

Click .

There are up to 8 text overlays configurable.

Summary of Contents for ALL-CAM2399-EP





















































































































































Search results

Summary of Contents for ALL-CAM2399-EP

Reviews:

Brands by name

Popular brands

Allnet ALL-CAM2399-EP, User Manual

Search results

Summary of Contents for ALL-CAM2399-EP

Reviews:

Brands by name

Popular brands