manualshive.com logo in svg

Allnet ALL-CAM2399-EP, User Manual

Share
Download
Allnet ALL-CAM2399-EP User Manual Download Page 122

ALL-CAM2399-EP User Manual 

© ALLNET GmbH Computersysteme 2015 – All rights reserved 

Errors and omissions excepted

 

121

 

Appendix 

Appendix 1 SADP Software Introduction 

 

Description of SADP 

SADP (Search Active Devices Protocol) is a kind of user-friendly and 
installation-free online device search tool. It searches the active online 
devices within your subnet and displays the information of the devices. 
You can also modify the basic network information of the devices using 
this software. 

 

Search active devices online 

 

Search online devices automatically 

After launch the SADP software, it automatically searches the 
online devices every 15 seconds from the subnet where your 
computer locates. It displays the total number and information of 
the searched devices in the Online Devices interface. Device 
information including the device type, IP address and port number, 
etc. will be displayed.

 

 

Figure A.1.1 Searching Online Devices 

 

 Device can be searched and displayed in the list in 15 seconds after it 

went online; it will be removed from the list in 45 seconds after it went offline. 

 

Search online devices manually 

You can also click 

 to refresh the online device list 

Summary of Contents for ALL-CAM2399-EP
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands