Allnet ALL-CAM2399-EP User Manual Download Page 18

Page: 18 / 151

ALL-CAM2399-EP User Manual

Errors and omissions excepted

Chapter 3

Access to the Network

Speed Dome

3.1

Accessing by Web Browsers

Steps:

Open the web browser.

In the address field, input the IP address of the network speed dome,
e.g., 192.0.0.64 and press the

Enter

key to enter the login interface.

Select English as the interface language on the top-right of login

interface.

Input the user name and password and click



The default user name is admin, password is admin.



You are highly recommended to change the initial password right
after the first login to avoid safety problem.

Figure 3-1

Install the plug-in before viewing the live video and operating the
speed dome. Please follow the installation prompts to install the
plug-in.

Summary of Contents for ALL-CAM2399-EP





















































































































































Search results

Summary of Contents for ALL-CAM2399-EP

Reviews:

Brands by name

Popular brands

Allnet ALL-CAM2399-EP, User Manual

Search results

Summary of Contents for ALL-CAM2399-EP

Reviews:

Brands by name

Popular brands