ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
100
7.3
Configuring Recording Schedule
Before you start:
Please make sure a local storage card is inserted in the speed dome or the
network storage is added to the speed dome, and the
Purpose:
There are two kinds of recording for the speed domes: manual recording
and scheduled recording. For the manual recording, refer to
Section 4.4
Recording and Capturing Pictures Manually
.
In this section, you can
follow the instructions to configure the scheduled recording. By default,
the record files of scheduled recording are stored in the SD card (if
supported) or in the network disk.
Steps:
1.
Enter the Record Schedule Settings interface:
Configuration > Advanced Configuration> Storage > Record
Schedule
Figure 7-7
Recording Schedule Interface
2.
Check the checkbox of
Enable Record Schedule
to enable scheduled
recording.
3.
Set the record parameters of the speed dome.
