Allied Telesis Tornado 562 S II User Manual Download Page 104 | Manualshive

Page: 104 / 121

background image

180 CONNECT 28000 The modem has connected to the line at 28000 bps and DCE SPEED reporting is enabled.

181 CONNECT 29333 The modem has connected to the line at 29333 bps and DCE SPEED reporting is enabled.

182 CONNECT 30667 The modem has connected to the line at 30667 bps and DCE SPEED reporting is enabled.

183 CONNECT 33333 The modem has connected to the line at 33333 bps and DCE SPEED reporting is enabled.

184 CONNECT 34667 The modem has connected to the line at 34667 bps and DCE SPEED reporting is enabled.

185 CONNECT 37333 The modem has connected to the line at 37333 bps and DCE SPEED reporting is enabled.

186 CONNECT 38667 The modem has connected to the line at 38667 bps and DCE SPEED reporting is enabled.

187 CONNECT 41333 The modem has connected to the line at 41333 bps and DCE SPEED reporting is enabled.

188 CONNECT 42667 The modem has connected to the line at 42667 bps and DCE SPEED reporting is enabled.

189 CONNECT 45333 The modem has connected to the line at 45333 bps and DCE SPEED reporting is enabled.

190 CONNECT 46667 The modem has connected to the line at 46667 bps and DCE SPEED reporting is enabled.

191 CONNECT 49333 The modem has connected to the line at 49333 bps and DCE SPEED reporting is enabled.

192 CONNECT 50667 The modem has connected to the line at 50667 bps and DCE SPEED reporting is enabled.

193 CONNECT 53333 The modem has connected to the line at 53333 bps and DCE SPEED reporting is enabled.

194 CONNECT 54667 The modem has connected to the line at 54667 bps and DCE SPEED reporting is enabled
.
195 +MRR: 28000 The modem has connected to the line at 28000 bps and carrier reporting is enabled. (See S95

and Xn.)

196 +MRR: 29333 The modem has connected to the line at 29333 bps and carrier reporting is enabled. (See S95

and Xn.)

197 +MRR: 30667 The modem has connected to the line at 30667 bps and carrier reporting is enabled. (See S95

and Xn.)

198 +MRR: 33333 The modem has connected to the line at 33333 bps and carrier reporting is enabled. (See S95

and Xn.)

199 +MRR: 34667 The modem has connected to the line at 34667 bps and carrier reporting is enabled. (See S95

and Xn.)

200 +MRR: 37333 The modem has connected to the line at 37333 bps and carrier reporting is enabled. (See S95

and Xn.)

201 +MRR: 38667 The modem has connected to the line at 38667 bps and carrier reporting is enabled. (See S95

and Xn.)

202 +MRR: 41333 The modem has connected to the line at 41333 bps and carrier reporting is enabled. (See S95

and Xn.)

203 +MRR: 42667 The modem has connected to the line at 42667 bps and carrier reporting is enabled. (See S95

and Xn.)

204 +MRR: 45333 The modem has connected to the line at 45333 bps and carrier reporting is enabled. (See S95

and Xn.)

205 +MRR: 46667 The modem has connected to the line at 46667 bps and carrier reporting is enabled. (See S95

and Xn.)

206 +MRR: 49333 The modem has connected to the line at 49333 bps and carrier reporting is enabled. (See S95

and Xn.)

207 +MRR: 50667 The modem has connected to the line at 50667 bps and carrier reporting is enabled. (See S95

and Xn.)

208 +MRR: 53333 The modem has connected to the line at 53333 bps and carrier reporting is enabled. (See S95

and Xn.)

209 +MRR: 54667 The modem has connected to the line at 54667 bps and carrier reporting is enabled. (See S95

and Xn.)

Notes:

1.

See Vn for result code selection, i.e., short form (result code) or verbose/extended (result message).

2.

See Wn for extended connect message control.

3.

See S95 for extended result code enabling options (which override some Wn commands).

4.

See Xn for extended result code subset enabling options.

5.

See +MR for modulation reporting control.

«
...
102
103
104
105
106
...
»

Summary of Contents for Tornado 562 S II


























































































































Reviews:

No comments

Related manuals for Tornado 562 S II

Univerge SV8100

Brand: NEC Pages: 44

Brand: TP-Link Pages: 3

DHI-NVR2104-P-4KS2

Brand: Dahua Pages: 23

DG834GT - 108 Mbps Super G Wireless ADSL Router

Brand: NETGEAR Pages: 2

Brand: Teknim Pages: 10

Brand: Eneo Pages: 68

Comet 3356P-LAN

Brand: ZyXEL Communications Pages: 38

NetCon FBR-1409TX

Brand: LevelOne Pages: 88

Brand: NETGEAR Pages: 152

Brand: LevelOne Pages: 83

Brand: Axis Pages: 64

Brand: SHOWTEC Pages: 15

Dimension GS-2024

Brand: ZyXEL Communications Pages: 266

EdgePoint EP-R8

Brand: Ubiquiti Pages: 22

Brand: Ubiquiti Pages: 2

ROUTE FINDER RFIPSC-1

Brand: Multitech Pages: 54

Brand: PACOM Pages: 16

Brand: UltrArmor Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands