C613-50102-01 REV C
Command Reference for x510 Series
465
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
S
WITCHING
C
OMMANDS
SHOW
LOOP
-
PROTECTION
show loop-protection
Overview
Use this command to display the current loop protection setup for the device.
Syntax
show loop-protection [interface <
port-list
>] [counters]
Mode
User Exec and Privileged Exec
Usage
This command is used to display the current configuration and operation of the
Loop Protection feature
Examples
To display the current configuration status, use the command:
awplus#
show loop-protection
Figure 14-4:
Example output from the
show loop-protection
command
To display the counter information, use the command:
awplus#
show loop-protection counters
Figure 14-5:
Example output from the
show loop-protection counters
command
Parameter
Description
interface
The interface selected for display.
<
port-list
>
A port, a port range, or an aggregated link.
counters
Displays counter information for loop protection.
awplus#show loop-protection
LDF Interval: 10
LDF Rx Window: 3
Fast Block: Disabled
Timeout
Int Enabled Action Status Timeout Remain Rx port
--------------------------------------------------------------------------
port1.0.1 Yes vlan-dis Normal 7 - -
port1.0.2 Yes vlan-dis Normal 7 - -
port1.0.3 Yes vlan-dis Normal 7 - -
...
