Allied Telesis AT-x510-28GPX, Command Reference Manual

Page: 2416 / 2601

C613-50102-01 REV C Command Reference for x510 Series 2416
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LLDP C
OMMANDS
LOCATION CIVIC
-
LOCATION CONFIGURATION
Default By default no civic address location information is configured.
Mode Civic Address Location Configuration
Usage The country parameter must be configured before any other parameters can be
configured; this creates the location. The country parameter cannot be deleted.
One or more of the other parameters must be configured before the location can
be assigned to a port. The country parameter must be entered as an upper-case
two-letter country code, as specified in ISO 3166. All other parameters are entered
as alpha-numeric strings. Do not configure all the civic address parameters (this
would generate TLVs that are too long). Configure a subset of these
parameters—enough to consistently and precisely identify the location of the
device. If the location is to be used for Emergency Call Service (ECS), the particular
ECS application may have guidelines for configuring the civic address location. For
more information about civic address format, see the
LLDP Feature Overview and
Configuration Guide .
To specify the civic address location, use the location civic-location identifier
command. To delete the civic address location, use the no variant of the location
civic-location identifier command. To assign the civic address location to
particular ports, so that it can be advertised in TLVs from those ports, use the
command
location civic-location-id command.
Examples To configure civic address location 1 with location "27 Nazareth Avenue,
Christchurch, New Zealand" in civic-address format, use the commands:
awplus# configure terminal
awplus(config)# location civic-location identifier 1
awplus(config-civic)# country NZ
awplus(config-civic)# city Christchurch
awplus(config-civic)# primary-road-name Nazareth
awplus(config-civic)# street-suffix Avenue
awplus(config-civic)# house-number 27
Related
Commands
location civic-location-id
location civic-location identifier
show lldp local-info
show location
< branch-road-name >
Branch road name (CA Type 36).
< sub-branch-road-name >
Sub-branch road name (CA Type 37).
< street-name-pre-
modifier >
Street name pre-modifier (CA Type 38).
< street-name-post-
modifier >
Street name post-modifier (CA Type 39).
Parameter Description