C613-50102-01 REV C
Command Reference for x510 Series
920
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF C
OMMANDS
DEFAULT
-
METRIC
(OSPF)
default-metric (OSPF)
Overview
This command sets default metric values for the OSPF routing protocol.
The
no
variant of this command returns OSPF to using built-in, automatic metric
translations, as appropriate for each routing protocol.
Syntax
default-metric <
1-16777214
>
no default-metric [<
1-16777214
>]
Mode
Router Configuration
Usage
A default metric facilitates redistributing routes even with incompatible metrics. If
the metrics do not convert, the default metric provides an alternative and enables
the redistribution to continue. The effect of this command is that OSPF will use the
same metric value for
all
redistributed routes. Use this command in conjunction
with the
command.
Examples
awplus#
configure terminal
awplus(config)#
router ospf 100
awplus(config-router)#
default-metric 100
awplus#
configure terminal
awplus(config)#
router ospf 100
awplus(config-router)#
no default-metric
Related
commands
Parameter
Description
<
1-16777214
>
Default metric value appropriate for the specified routing protocol.