C613-50102-01 REV C
Command Reference for x510 Series
446
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
S
WITCHING
C
OMMANDS
LOOP
-
PROTECTION
ACTION
-
DELAY
-
TIME
loop-protection action-delay-time
Overview
Use this command to sets the loop protection action delay time for an interface to
specified values in seconds. The action delay time specifies the waiting period for
the action.
Use the
no
variant of this command to reset the loop protection action delay time
for an interface to default.
Syntax
loop-protection action-delay-time
<0-86400>
no loop-protection action
Default
Action delay timer is disabled by default.
Mode
Interface Configuration
Example
To configure a loop protection action delay time of 10 seconds on port 1.0.4, use
the commands:
awplus#
configure terminal
awplus(config)#
interface port1.0.4
awplus(config-if)#
loop-protection action-delay-time 10
Related
Commands
Parameter
Description
<0-86400>
Time in seconds; 0 means action delay timer is disabled.
