manualshive.com logo in svg

Allied Telesis AT-x510-28GPX, Command Reference Manual

Product Information: The Allied Telesis AT-x510-28GPX is a high-performance switch that offers advanced features for enhanced network connectivity. You can easily access the user manual, available for free download on our website, to explore its comprehensive functionality and unleash its full potential. Visit manualshive.com for quick and hassle-free downloads.

Share
Download
background image

C613-50102-01 REV C

Command Reference for x510 Series

24

AlliedWare Plus™ Operating System - Version 5.4.6-1.x

ipv6 access-list extended proto  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1496
(ipv6 access-list extended IP protocol filter)   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1499
(ipv6 access-list extended TCP UDP filter) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1502
ipv6 access-list standard (named) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1504
(ipv6 access-list standard filter)   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1506
ipv6 prefix-list   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1508
show ipv6 access-list (IPv6 Software ACLs)  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1510
show ipv6 prefix-list   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1512
vty ipv6 access-class (named)   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1513

Chapter  39:

QoS Commands   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1514

Introduction   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1514
class   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1516
class-map  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1517
clear mls qos interface policer-counters .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1518
default-action   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1519
description (QoS policy-map)   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1520
egress-rate-limit .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1521
match access-group   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1522
match cos  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1524
match dscp  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1525
match eth-format protocol  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1526
match inner-cos  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1529
match inner-vlan   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1530
match ip-precedence   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1531
match mac-type .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1532
match tcp-flags   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1533
match vlan   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1534
mls qos cos  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1535
mls qos enable .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1536
mls qos map cos-queue to   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1537
mls qos map premark-dscp to  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1538
no police   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1540
police single-rate action .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1541
police twin-rate action .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1543
policy-map  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1545
priority-queue  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1546
remark-map   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1547
remark new-cos  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1549
service-policy input    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1551
set ip next-hop (PBR)  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1552
show class-map  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1554
show mls qos    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1555
show mls qos interface    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1556
show mls qos interface policer-counters   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1559
show mls qos interface queue-counters    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1561
show mls qos interface storm-status  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1563
show mls qos maps cos-queue   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1564
show mls qos maps premark-dscp   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1565
show platform classifier statistics utilization brief .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1566
show policy-map   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1567
storm-action  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1568
storm-downtime   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1569

Summary of Contents for AT-x510-28GPX










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-x510-28GPX

Delta EXPERT-POE-54G User Manual preview
EXPERT-POE-54G
Brand: Delta Pages: 4
Ubiquiti ES-24-250W Quick Start Manual preview
ES-24-250W
Brand: Ubiquiti Pages: 24
Ubiquiti USW-24 User Manual preview
USW-24
Brand: Ubiquiti Pages: 13
Ubisys ZIGBEE S2(-R) Quick Start Manual preview
ZIGBEE S2(-R)
Brand: Ubisys Pages: 2
Handic VIC-Switch User Manual preview
VIC-Switch
Brand: Handic Pages: 2
IDEM SAFETY SWITCHES KLM-P2L Operating Instructions preview
KLM-P2L
Brand: IDEM SAFETY SWITCHES Pages: 2
P-Link Computer KVM-MU108AP User Manual preview
KVM-MU108AP
Brand: P-Link Computer Pages: 92
Thinklogical TXL 640 User Manual preview
TXL 640
Brand: Thinklogical Pages: 27
Radial Engineering Cherry Picker User Manual preview
Cherry Picker
Brand: Radial Engineering Pages: 8
Alloy AMS-10T2SFP Quick Install Manual preview
AMS-10T2SFP
Brand: Alloy Pages: 33
Madas CE-51AT1438 Manual preview
CE-51AT1438
Brand: Madas Pages: 24
Linksys EFAH05W User Manual preview
EFAH05W
Brand: Linksys Pages: 22
NETGEAR GS308P Installation preview
GS308P
Brand: NETGEAR Pages: 2
Cables to Go 29508 User Manual preview
29508
Brand: Cables to Go Pages: 16
Texas Instruments XIO3130 EVM User Manual preview
XIO3130 EVM
Brand: Texas Instruments Pages: 17
G&D DP1.2-MUX2-NT Installation And Operation Manual preview
DP1.2-MUX2-NT
Brand: G&D Pages: 76
Neol ePowerSwitch 1GR2 User Manual preview
ePowerSwitch 1GR2
Brand: Neol Pages: 47
Quick EBSN Series Manual For Use And Installation preview
EBSN Series
Brand: Quick Pages: 28

Brands by name

Popular brands

Load more brands