Allied Telesis AT-GS950/48, User Manual, Page: 94 / 410

Chapter 5: Multiple Spanning Tree Protocol
94
MST Settings
You can create, modify and delete MST instance settings with the
procedures in the following sections:
 ”Open MST Settings Page”
 “Specify Region and Revision Level” on page 94
 “Create VLAN Mapping to MST Instance” on page 95

“Modify MST Instance” on page 95
 “Delete MST Instance” on page 95
Open MST
Settings Page
1. From the main menu on the left side of the page, select Bridge .
The Bridge folder expands.
2. From the Bridge folder, select the Spanning Tree folder.
The Spanning Tree folder expands.
3. From the Spanning Tree folder, select MST Settings .
The MST Settings Page is displayed. See Figure 32.
Figure 32. MST Settings Page
Specify Region
and Revision
Level
1. Define the region and revision:
Configuration Name - This parameter specifies the region’s name
where the bridge is a member. This name must be identical to the
regional names specified on other switches in the same MSTP region.