manualshive.com logo in svg

Allied Telesis AT-GS950/48, User Manual, Page: 52 / 410

Share
Download
Allied Telesis AT-GS950/48 User Manual Download Page 52

Chapter 2: System Configuration

52

DHCP and ATI Web Discovery Tool

The AT-GS950/48 Gigabit Ethernet Smart switch is managed through a 
web browser interface only. The factory default IP address is 192.168.1.1.

The switch does not have a local console connector, which means that 
you cannot learn what the switch’s management IP address is on a web 
browser without first knowing what the address is. Once the IP address is 
known, you can enter it in the browser. 

When the DHCP feature is enabled, a DHCP server automatically assigns 
an IP address which is not advertised over the network. As a 
consequence, you do not know the IP address that has been assigned to 
the switch. 

Note

The new IP address assignment from the DHCP server may take 1 
to 2 minutes before the process is completed.

Fortunately, there is an ATI Web Discovery Tool available that resolves 
this issue. It detects the MAC address, IP address and other information of 
the AT-GS950 series switches that are present on your local area 
network. 

Note

The ATI Web Discovery Tool is available for download on the AT-
GS950/48 product page at

 alliedtelesis.com

.

Summary of Contents for AT-GS950/48



























































































































































































































































































































































































































Reviews:

No comments