Allied Telesis AT-GS950/48, User Manual, Page: 234 / 410

Chapter 17: SNMPv3
234
3. Enter the Group Name .
Note
This entry must be pre-defined on the SNMP User/Group page.
Refer to “Creating SNMPv3 View Names” on page 233.
4. Enter the Read View Name .
This name is an optional field. It can be up to 32 characters in length.
5. Enter the Write View Name .
This name is an optional field. It can be up to 32 characters in length.
6. Enter the Notify View Name .
This name is an optional field. It can be up to 32 characters in length.
7. From the Security Model pull-down menu, select v3 .
8. Enter the Security Level from the pull-down menu. The selection
options are:
NoAuthNoPriv : This selection is appropriate when no Auth-
Protocol or Priv-Protocol (no encryption) are selected on the
SNMP User/Group page.
AuthNoPriv : Choose this selection when encryption has been
enabled, but only the Auth-Protocol has a password assigned,
and the Priv-Protocol has been selected as none on the SNMP
User/Group page.
AuthPriv : When both the Auth-Protocol or Priv-Protocol have
been enabled, choose this selection.
9. Click the Add button.
See Figure 87 on page 235 for an example.