Allied Telesis AT-GS950/48, User Manual

Page: 215 / 410

AT-GS950/48 Web Interface User Guide
215
SNMPv1 and SNMPv2c User and Group Names
SNMPv1 and SNMPv2c User Name and Group Name definitions is the
basis for creating SNMP communities. Use the following sections to create
and delete User and Group Names:

“Create User and Group Names,” next
 “Modify User and Group Names” on page 217
 “Delete User and Group Names” on page 217
A community string has attributes for controlling who can use the string
and what the string allows a network management station to do on the
switch.
The AT-S116 Management Software does not provide any default
community strings. You must first define an SNMP User and Group Name
on the SNMP User/Group page and then define a Community Name on
the SNMP Community Table page.
Create User and
Group Names
To create an SNMP User and Group Name, perform the following
procedure:
1. From the main menu on the left side of the page, select the SNMP
folder.
The
SNMP folder expands.
2. From the SNMP folder , select SNMP User/Group .
The SNMP User/Group Page is displayed in Figure 77.
Figure 77. SNMP User/Group Page