Allied Telesis AT-GS950/48, User Manual

Page: 255 / 410

AT-GS950/48 Web Interface User Guide
255
Delete a Rate
Control Entry
To delete a rate control entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Rate Control
Settings .
The Rate Control Settings page is displayed. An example of the page
with an entry is shown in Figure 98 on page 254.
3. From the Rate Control page, identify which committed rate entry that
you want to delete and click the Delete button in the Action column.
The committed rate entry is deleted from the Committed Rate table.
Note
You cannot delete a rate control entry if it is part of a policy’s
configuration. In this case, you must remove the rate control index
from any policy’s configuration that uses this index before you can
delete the rate control entry.
You can also use the Delete All button to delete all entries from the
policy table.
4. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.