Allied Telesis AT-8100L/8POE, User Manual

Page: 29 / 330

AT-8100 Series Version 2.2.5.0 Web Interface User’s Guide
29

System Name — Name of the switch. To specify this field, see
“Setting the Switch Information” on page 48.

Version — Software version number of the Management Software.

Contact — Contact person for the switch. To specify this field, see
“Setting the Switch Information” on page 48.

Location —Location of the switch. To specify this field, see “Setting
the Switch Information” on page 48.
The Services section displays the following information:

IPv6 Management — Indicates if IPv6 Management is enabled or
disabled on the switch.

SNMP — SNMP setting of the switch.

HTTP — HTTP setting of the switch.

Telnet — Indicates if Telnet is enabled or disabled on the switch.

SSH — Indicates if SSH is enabled or disabled on the switch.

Remote Logging — Indicates if the remote logging is enabled or
disabled on the switch.

Spanning Tree — Indicates if STP, RSTP, or MSTP is enabled on
the switch. The default setting is “RSTP.”

QoS — Indicates if QoS is enabled or disabled on the switch.

LLDP — Indicates if LLDP is enabled or disabled on the switch.

sFLOW — Indicates if sFlow is enabled or disabled on the switch.

IGMP Snooping — Indicates if IGMP Snooping is enabled or
disabled on the switch.

IGMP Snooping Querier — Indicates if IGMP Snooping Querier is
enabled or disabled on the switch.

802.1x Port Authentication — Indicates if 802.1x Port
Authentication is enabled or disabled on the switch.

RIP — Indicates if RIP is enabled or disabled on the switch.
The Administration Options section displays the following information:

System Upgrade — Select this field to upgrade your system
software. See “Upgrading the Software” on page 58.

Reboot — Select this field to reboot the switch. For instructions,
see “Rebooting a Switch” on page 57.