Allied Telesis AT-8100L/8POE, User Manual

Page: 298 / 330

Chapter 25: LLDP and LLDP-MED
298

Additional Code — 1234

Seat — cube-411a

Primary Road Name — Zanker

Road Section — North

Branch Road Name — State-Lane

Sub Branch Road Name — Boulder-Creek-Avenue

Street Name Pre Modifier — West

Street Name Post Modifier — Div
8. Click Apply .
9. Click SAVE to save your changes to the startup configuration file.
Creating a
Coordinate
Location
To create an LLDP Coordinate Location, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 122 on
page 284.
2. From the Discovery & Monitoring tab, hover over LLDP .
The LLDP tab appears on the right.
3. From the LLDP tab, move the cursor to the right and hover over
Locations .
The Locations tab is displayed. See Figure 129 on page 295.
4. From the Locations tab drop-down menu, move the cursor to the right
and select Coordinates .
The LLDP Coordinate Location List page is displayed. See Figure 132.
Figure 132. LLDP Coordinate Location List Page
5. From the LLDP Coordinate Location page, click Add.