Allied Telesis AT-8100L/8POE, User Manual

Page: 328 / 330

Chapter 26: sFlow
328
The sFlow Port Modify page is displayed. See Figure 147.
Figure 147. sFlow Port Modify Page
4. Change the following fields as needed:

Interface — Indicates the port ID. You cannot change this
parameter on this page.

Polling Interval — Enter the polling interval for the port. This
controls the maximum amount of time permitted between
successive pollings of the packet counter on the port by the sFlow
agent.

Sample Rate — Enter the packet sampling rate on the port. The
sampling rate dictates the number of ingress packets from which
one sample is taken on a port and sent by the agent to the sFlow
collector. For example, a sample rate of 700 on a port means that
one sample packet is taken for every 700 ingress packets. The
possible values are 0 and 256 to 16,441,700 packets. Entering the
value 0 disables packet sampling.
5. Click Apply .
6. Click SAVE to save your changes to the startup configuration file.