Allied Telesis AT-8100L/8POE, User Manual

Page: 105 / 330

AT-8100 Series Version 2.2.5.0 Web Interface User’s Guide
105
Assigning a Unicast MAC Address
To assign a unicast MAC address to the MAC address table, do the
following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. Hover over Mac Table and then move the cursor to the right to select
Unicast .
The Unicast MACs page is displayed. See Figure 39 on page 102.
3. Click Add.
The Unicast MAC Page is displayed. See Figure 41.
Figure 41. Unicast MAC Address Page
4. To add a new unicast MAC address, do the following:

MAC Address — Enter a unicast MAC address. Use the following
format:
xx:xx:xx:xx:xx:xx or xxxx.xxxx.xxxx

Port Number — Select the port number to which the end node of
the MAC address is connected.

VLAN — Select a VLAN where the port is a member.

Action — Select one of the following options: