Allied Telesis AT-8100L/8POE, User Manual

Page: 193 / 330

AT-8100 Series Version 2.2.5.0 Web Interface User’s Guide
193

AAA Accounting — Select a RADIUS accounting setting. Choose
from the following:
Start-Stop : Indicates that a start accounting message is sent at
the beginning of a session, and a stop accounting message is
sent at the end of the session.
Stop-Only : Indicates a stop accounting message is sent at the
end of the session.
None : Indicates that sending accounting messages is disabled.
4. Click Apply .
The Active Authentication Server field shown on the upper middle of
the page indicates “RADIUS.”
5. Click SAVE to save your changes to the startup configuration file.
Adding a
RADIUS Server
To add a RADIUS server, do the following:
1. Click Add near the RADIUS server list.
The RADIUS Server Add page is displayed. See Figure 72.
Figure 72. RADIUS Server Add Page
2. Configure the following as needed:

IP Address — Enter the IP address of a RADIUS server on the
network. The IP address must be in the following IPv4 format:
xxx.xxx.xxx.xxx.