Allied Telesis AT-8100L/8POE, User Manual

Page: 286 / 330

Chapter 25: LLDP and LLDP-MED
286

Holdtime Multiplier — Enter a holdtime multiplier value. The
transmit interval is multiplied by the holdtime multiplier to give the
Time To Live (TTL) the switch advertises to the neighbors. The
range is 2 to 10. The default value is 4.

Non Strict Med TLV Order Check — Check the checkbox to set
the switch to accept LLDP-MED advertisements, even if the TLVs
are not in the standard order, as specified in ANSI/TIA-1057. This
configuration is useful if the switch is connected to devices that
send LLDP-MED advertisements in which the TLVs are not in the
standard order. By default, this checkbox is not selected.

Notification Interval — Enter a notification interval. This is the
minimum interval between LLDP SNMP notifications (traps). The
range is 5 to 3,600 seconds. The default value is 5.

Reinit — Enter a reinitialization delay. This is the number of
seconds that must elapse after LLDP is disabled on a port before it
can be reinitialized. The range is 1 to 10 seconds. The default
value is 2.

Tx Delay — Enter a transmission delay. This is the minimum time
interval between transmissions of advertisements due to changes
in LLDP local information. The range is 1 to 8192 seconds. The
default value is 2.

Total Neighbors — Indicates the number of LLDP neighbors the
switch has discovered on all its ports.

Neighbors Last Update — Indicates the time since the LLDP
neighbor table was last updated.
5. Click Apply .
6. Click SAVE to save your changes to the startup configuration file.