Alliance Laundry Systems NetMaster HC18NC2, Programming Manual

Page: 134 / 146

Programming NetMaster
F232152
132 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
117. Special Cycle Extra Rinse
Extra Fill/Agitate Time “+117”
This option allows the owner to set the amount of
additional extra rinse fill time during agitation for the
Special Cycle.
How to Program Special Cycle Extra Rinse
Extra Fill/Agitate Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “ PrOg ” appears in the VFD. Press
the START (enter) keypad and “ +001 ” will
appear in the VFD.
Figure 213
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “
+117
” appears in the VFD. Refer
to Figure 214.
Figure 214
4. When “
+117
” appears in the VFD, press the START
(enter) keypad. The current number of minutes
set for the Special Cycle Extra Rinse Extra Fill/
Agitate Time will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number of minutes displayed in the VFD to the
desired number of minutes. Refer to Figure 215.
NOTE: The Special Cycle Extra Rinse Extra Fill/
Agitate Time can be set from zero (0) to 15 minutes.
Figure 215
6. Press the START (enter) keypad when the correct
number of minutes appears in the VFD. The next
option, “
+118
”, will appear in the VFD.
NOTE: The Special Cycle option needs to be
turned on (refer to option 115) for the Special Cycle
Extra Rinse Extra Fill/Agitate Time to take effect.
NOTE: To program “
+118
” (Auto-Flush Option),
refer to option 118 in Programming NetMaster in
the Basic Programming Guide. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode.
C762I
COM161N
COM161N
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
3 2