Alliance Laundry Systems NetMaster HC18NC2, Programming Manual

Page: 9 / 146

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
7
F232152
Entering the Manual Mode
For programming, testing, and retrieving information
from NetMaster, it is often necessary to enter the
Manual Mode by following the four simple steps below.
How to Enter the Manual Mode
1. Be sure the washer-extractor is in the Ready Mode
before continuing to step 2. Refer to Figure 1. If
the washer-extractor is in an active cycle, rapid
advance through the cycle. Refer to Rapid
Advance Feature section of the Basic
Programming Guide. If coins have been entered,
refer to Clear Vend Feature section of the Basic
Programming Guide.
Figure 1
2. Open the access panel. Refer to Opening the
Access Panel section of the Basic Programming
Guide.
3. While pressing and holding the NORMAL
keypad with one hand, press the HOT keypad
with the other hand.
4. The VFD display will show “
rAPd
”. Refer to
Figure 2.
Figure 2
5. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the options until the
desired option appears in the VFD.
6. Press the START (enter) keypad.
For additional information on the Manual Mode, refer
to Entering Manual Mode section of the Basic
Programming Guide.
C854I
B30R