Alliance Laundry Systems NetMaster HC18NC2, Programming Manual

Page: 74 / 146

Programming NetMaster
F232152
72 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
86. Cold Water Temperature “+086”
This option allows the owner to program the cold
water temperature for models equipped with
temperature sensing capabilities.
How to Program Cold Water Temperature
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “ PrOg ” appears in the VFD. Press
the START (enter) keypad and “ +001 ” will
appear in the VFD.
Figure 123
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “
+086
” appears in the VFD. Refer
to Figure 124.
Figure 124
4. When “
+086
” appears in the VFD, press the
START (enter) keypad. A number will appear in
the VFD. This number corresponds to the current
Cold Water Temperature value.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current Cold
Water Temperature value to the desired Cold
Water Temperature value selected from Table 13
on the following page. Refer to Figure 125.
NOTE: Cold Water Temperature is selectable
between 60° and 190° Fahrenheit (16° and 87°
Celsius). Default temperature value is 7 (70°F).
NOTE: Refer to option 82 to select Celsius or
Fahrenheit display.
Figure 125
6. Press the START (enter) keypad when the correct
number appears in the VFD. The next option,
“
+087
”, will appear in the VFD.
NOTE: To program “
+087
” (PreWash #1 Fill/
Tumble Dispenser), refer to option 87. To program
other options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode.
C762I
COM158N
COM158N
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
3 2