Alliance Laundry Systems NetMaster HC18NC2, Programming Manual

Page: 25 / 146

Programming NetMaster
23
F232152 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
14. Special Cycle Vend Price
“+014”
This option allows the owner to program the machines
to offer extra features to the customers for an added
vend price. This vend price will be displayed in the
VFD during the first 30 seconds of the first fill/agitate.
Refer to options 115, 116 and 117 for programming
these features.
How to Program Special Cycle Vend Price
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “ PrOg ” appears in the VFD. Press
the START (enter) keypad and “ +001 ” will
appear in the VFD.
Figure 33
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “
+014
” appears in the VFD. Refer
to Figure 34.
Figure 34
4. When “ +014 ” appears in the VFD, press the
START (enter) keypad. There are five digits in
the Special Cycle Vend Price. The fifth digit will
appear in the VFD and will flash one second on,
one second off. Refer to Figure 35.
Figure 35
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number until correct. Refer to Figure 36.
Figure 36
C762I
C776I
C776I
C826I
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
3 2