Alliance Laundry Systems NetMaster HC18NC2, Programming Manual

Page: 133 / 146

Programming NetMaster
131
F232152 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
116. Special Cycle Extra Wash Fill/
Agitate Time “+116”
This option allows the owner to set the amount of extra
wash time during agitation for the Special Cycle.
How to Program Special Cycle Extra Wash
Fill/Agitate Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “ PrOg ” appears in the VFD. Press
the START (enter) keypad and “ +001 ” will
appear in the VFD.
Figure 210
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “
+116
” appears in the VFD. Refer
to Figure 211.
Figure 211
4. When “
+116
” appears in the VFD, press the
START (enter) keypad. The current number of
minutes set for the Special Cycle Extra Wash
Fill/Agitate Time will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number of minutes displayed in the VFD to the
desired number of minutes. Refer to Figure 212.
NOTE: The Special Cycle Extra Wash Fill/Agitate
Time can be set from zero (0) to 15 minutes.
Figure 212
6. Press the START (enter) keypad when the correct
number of minutes appears in the VFD. The next
option, “
+117
”, will appear in the VFD.
NOTE: The Special Cycle option needs to be
turned on (refer to option 115) for the Special Cycle
Extra Wash Fill/Agitate Time to take effect.
NOTE: To program “
+117
” (Special Cycle Extra
Rinse Extra Fill/Agitate Time), refer to option 117.
To program other options, refer to the appropriate
section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode.
C762I
COM160N
COM160N
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
3 2