Alliance Laundry Systems NetMaster HC18NC2, Programming Manual

Page: 48 / 146

Programming NetMaster
F232152
46 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
67. Delicates Spin Extract Speed
“+067”
This option allows the owner to program the speed of
extraction during the Delicates cycle on Variable
Frequency Drive models (NCV, NRV, or NXV) only.
How to Program Delicates Spin Extract
Speed
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “ PrOg ” appears in the VFD. Press
the START (enter) keypad and “ +001 ” will
appear in the VFD.
Figure 84
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “
+067
” appears in the VFD. Refer
to Figure 85.
Figure 85
4. When “
+067
” appears in the VFD, press the
START (enter) keypad. The current number set
for the Delicates Spin Extract Speed will appear
in the VFD.
Value of 0 = High Speed
Value of 1 = Very High Speed
NOTE: Very High Speed is available on Variable
Frequency Drive models (NRV) only.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
extraction speed displayed in the VFD to the
desired extraction speed. Refer to Figure 86.
Figure 86
6. Press the START (enter) keypad when the correct
number of minutes appears in the VFD. The next
option, “
+068
”, will appear in the VFD.
NOTE: To program “
+068
” (Delicates Extracts
On/Off), refer to option 68. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode.
C762I
COM118N
COM118N
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
3 2