20
Allen® Advance Table User Manual (D-720686-A6)
5.
When the cross tube is fully extended, lower
the handle to lock the cross tube into
position.
NOTE:
To lock the cross tube, it must be fully extended.
I
NSTALL
THE
H-B
RACKETS
AND
A
P
ATIENT
S
UPPORT
T
OP
To install an Advance Pinless H-Bracket and a patient support top, go to
“Install the Advance Pinless H-Bracket” on page 24
WARNING:
Use patient support tops that are designed for the simultaneous use of tilt
and Trendelenburg or Reverse Trendelenburg only. Otherwise, patient fall,
injury, or equipment damage could occur.
1.
Make sure the patient support top is designed for the simultaneous
use of tilt and Trendelenburg or Reverse Trendelenburg.
2.
Make sure the brakes on the Table are locked (the
Locked
indicator on the Table display is
green
).
3.
If you need to use the lateral top, remove the
H-brackets or Advance Pinless H-Bracket, if installed
(refer to “Remove a Support Top and/or Bracket” on
page 23) and go to “Install the Lateral Bracket” on page 28.
4.
If the lower H-brackets are not installed on
each end of the Table, do Step a through
Step i. Otherwise, go to Step 5 on page 22.
a.
Hold the H-bracket so that the
open end is down, the J ends
are toward you, and the bracket
is angled toward you.
Summary of Contents for A-71100-BR
Page 2: ......
Page 8: ...vi Allen Advance Table User Manual D 720686 A6 NOTES ...
Page 91: ......
Page 92: ......
