allen A-71100-BR User Manual Download Page 79

Page: 79 / 92

Allen® Advance Table User Manual (D-720686-A6)

ACCESSORIES

For installation and use instructions, refer to the manufacturer’s
documentation included with the accessory.

WARNING:

Weight ratings may differ for some accessories used with the Table. Make
sure you do not exceed the weight rating that is shown on the accessory.
To do so could cause patient fall, injury, or equipment damage.

Part
Number

Description

Part
Number

Description

A-40022

Easy Lock® socket
(US)

A-40023

Easy Lock® socket
(EU)

A-40024

Easy Lock® socket
(UK)

A-70310

Comfort mask
disposables

A-70404

Supine access top,
12" (304.8 mm)

A-70434

Supine 12"
(304.8 mm) access
top section pad, 2"
(50.8 mm) Astrus

A-70436

Advance operating
top pad

A-70500-EU

Armboard rail (EU)

A-70500-UK Armboard rail (UK)

A-70500-US

Armboard rail (US)

A-70501

Flex frame accessory
rail, 6" (152.4 mm)
(US)

A-70501-EU

Flex frame accessory
rail, 6" (152.4 mm)
(EU)

A-70501-UK Flex frame accessory

rail, 6" (152.4 mm)
(UK)

A-70615-EU

Arm support, (EU)

A-70615-UK Arm support, (UK)

A-70615-US

Arm support, (US)

A-70700

C-Flex® head
positioner system

A-70701

C-Flex® base unit

A-70702

C-Flex® clean cape
disposables

A-70710

Starburst adapter for
standard Mayfield or
DORO

A-70715

Prone mask head
module

A-70720

Flat plate head
module

Summary of Contents for A-71100-BR





























































































Search results

Summary of Contents for A-71100-BR

Reviews:

Brands by name

Popular brands

allen A-71100-BR, User Manual

Search results

Summary of Contents for A-71100-BR

Reviews:

Brands by name

Popular brands