Allen® Advance Table User Manual (D-720686-A6)
19
Manually Release the Brakes
Pull the Emergency Brake Release on
both
columns.
NOTE:
Each column has a release. You must pull both releases to unlock the
brakes. The handles do not have to be pulled at the same time.
Reset the Electronic Brakes after being Manually Released
After you use the Emergency Brake Releases to unlock the brakes, you
must do these steps to lock or reset the brakes:
1.
Make sure there is power to the Table, and
its On/Off switch is
on
.
2.
Press and hold the
Key
control as you press the
Unlock
control. You will hear the brakes move.
3.
Press and hold the
Lock
control until the
Locked
indicator
on the Table display is
green
.
4.
Try to move the Table to make sure the brakes are locked. If
the brakes did not lock, repeat Step 2 and Step 3.
A
DJUST
THE
L
ENGTH
OF
THE
T
ABLE
1.
If there is a support top on the Table, remove the top (see page 23).
2.
Unlock
the brakes.
3.
Lift the cross tube handle to unlock the cross
tube.
4.
With a person at each end of the Table, adjust
the length as necessary:
•
Retract
—push the columns toward each
other.
•
Extend
—pull the columns away from each other.
Summary of Contents for A-71100-BR
Page 2: ......
Page 8: ...vi Allen Advance Table User Manual D 720686 A6 NOTES ...
Page 91: ......
Page 92: ......
