manualshive.com logo in svg

allen A-71100-BR, User Manual

Share
Download
allen A-71100-BR User Manual Download Page 47

Allen® Advance Table User Manual (D-720686-A6)

 39

NOTE:

There are three activation surfaces on the lift trigger for ease of use. 
Use the activation surface that is most comfortable to operate, based 
on your position and the orientation of the table.

4.

Raise or lower the patient support carriage to the correct height for 
the procedure.

5.

Release the lift trigger and lower the patient support carriage until it 
locks in position. The lift triggers will return to the locked position 
when the patient support carriage is locked in position.

6.

When the patient support carriage is in the lowest position, make sure 
that the patient support carriage is locked in position. If necessary, 
move the patient support carriage up until the patient support 
carriage is locked in position.

P

UT

 

THE

 T

ABLE

 

IN

 

A

 T

RENDELENBURG

 P

OSITION

WARNING:

Before you adjust the Table or use the tilt feature, make sure that the 
brakes are locked, the patient is secured to the support top and is fully 
prepared for the adjustment, and the Table is free of objects that could 
interfere with the adjustment. Otherwise, patient fall, injury, or equipment 
damage could occur.

1.

Make sure that—

•

The brakes are locked (the 

Locked

 indicator on the 

Table display is 

green

).

•

The patient is secured to the support top and is fully 
prepared for the adjustment.

NOTE:

We recommend that you use the two large security straps to secure the 
patient to the support top.

•

The Table is free of objects that could interfere with the adjustment. 

Summary of Contents for A-71100-BR





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands